How Do I Get The Right Roof Vent Cover Or Lid For My Trailer?

Question

Question:

I am trying to replace 2 vent convers on the above trailer, but I cannot determine which ones to buy. can you assist please?2009 north trail 21fbs tt vent cover

asked by: Terry K

0

Expert Reply:

Unfortunately I don't have a parts list for your trailer, so I can't tell you what you need without some pictures or a further description. Roof vents have a standard size of 14-1/4 x 14-1/4 inches, but there are different hinge types. I've attached a photo to assist and linked the page to all of your options for style and color choices.

expert reply by: Jason S

0

click to enlarge

Answer 1

Looks like you need a continuous hinge roof vent lid like the part #BV0554-01 based on what I can see in your picture can compared to the install pictures we have of this cover.

view full answer...

Answer 2

Vent covers are actually pretty universal so there typically isn't a complete list as to what each cover fits, but I did reach out to my contact at Ventline who confirmed that the replacement vent cover for your Ventline AS-13 M-VD0449 is…

view full answer...

Answer 3

I checked with Ventline and they longer provide the Replacement Spring Clip for Ventline Ventadome #VD0453-00vd0453-00 spring clip and we no longer sell them either. That said a full replacement lid like the Replacement Dome for Ventline Ventadome…

view full answer...

Answer 4

The Replacement Screen for Ventline Ventadome Trailer Roof Vents part #BVD0434-31 is used on the following Ventline models; V2092, V2110, V2094 and V2119. If you have the V2092, V2110, or V2119 then you'll need the Replacement Screen Frame…

view full answer...

Answer 5

The hinge looks VERY similar to the part #BVD0449-A03 that we offer but slightly different possibly as it's hard to see in the picture. Does the #BVD0449-A03 look like what your roof vent had prior?

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

How Do I Get The Right Roof Vent Cover Or Lid For My Trailer?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching