Trailer Hitch That Fits 2008 Honda Fit Sport and Non-Sport Models

Question

Question:

Same receiver for both models?

asked by: Geoff B

0

Expert Reply:

For your 2008 Honda Fit we have the Draw Tite part # 24776 which fits the Sport models and non-Sport models.

expert reply by: Jameson C

0

Answer 1

Yes, the Hollywood Rack bike rack part #HR200Z that you referenced is Class I hitch compatible so it would work well on your 2008 Honda Fit Sport as long as it has a hitch installed on it like the Draw Tite part #24776. I attached a review video for…

view full answer...

Answer 2

When using the change key part #Y8007835 to remove and replace a lock cylinder what you have to do is first have the lock in the unlocked position. Next you will insert the change key into the core. With the key in the core you will then be able to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I have a solution for you, however the Draw Tite SportFrame Class I, part #24776 is only compatible with 2 bike racks. These Class I hitches can only handle weight within certain distances from the vehicle, and risk damage or failure if used with…

view full answer...

Answer 5

I checked with Curt and for the Curt Class I Receiver Hitch #C11058 you mentioned in your question for the 2007 Honda Fit, the tongue weight is in fact 150 pounds and the towing weight capacity is 1,500 pounds. The steel standard used for the Curt…

view full answer...

Answer 6

Honda doesn't offer an official roof weight capacity for the 2020 Honda Fit even in their owner's manuals. They do not offer factory roof racks since they do not believe the Fit is designed to carry weight. They do say that the total load…

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...