Block Heater Install Location on 2007 Dodge Caravan

Question

Question:

The location instructions for KH11613 on a 2007 Caravan says 12 oclock position. Am I to assume the core plug to which the heater is to be installed is above the torque converter on the back side of the engine opposite the flywheel and serpentine belt? Please elaborate.

asked by: David N

0

Expert Reply:

I took a look at the installation instructions for the Kat's Heaters Custom Engine Block Heater # KH11613 and the 12 o'clock position is simply the direction the heater needs to face to avoid contact with the engine wall on your 2007 Dodge Caravan.

According to Kat's you are going to need to install the heater in the Rear Left (RL) like you see in the accompanying diagram.

expert reply by: Kyle S

0

click to enlarge

Answer 1

We have two Kat's Heaters Custom Engine Block Heaters for your 2005 Dodge Caravan depending on the size of the engine. If you have a 3.3L V6 Engine, then the correct part number for you is #KH11613. If you have a 3.8L V6 Engine, then the correct…

view full answer...

Answer 2

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 3

For your 2018 Toyota RAV4 with the 2.5L I4 engine the Kat's Heaters Custom Fit Engine Block Heater #KH11813 will work perfectly. This cartridge heater will clip right into the cavity of your engine block and submerges in the coolant to keep them…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Block Heater Install Location on 2007 Dodge Caravan

Product Page this Question was Asked From

Continue Researching