Spare Tire Cover for 30" Diameter Tire on Gooseneck Trailer

Question

Question:

ST235/80R16 And we live at 3000’ elevation not 300 Likely more UV

asked by: Bev

0

Expert Reply:

If you can provide me with your full tire size ###/80-R16 then I would be happy to make sure the Classic Accessories Custom Fit Spare Tire Cover part # 052963751604 is a fit. However, if the overall diameter of the tire is indeed 30" then this cover will work well for you. It secures to the tire using an elastic hem so there is some adjustability to be had. It is white in color and has a three year warranty.

I have attached a review video for you.

expert reply by: Conner L

0

Bev

7/19/2018

ST235/80R16 And we live at 3000’ elevation not 300 Likely more UV

Reply

Conner L.

7/19/2018

The ST235/80-R16 tire that you have is 30.8" diameter x 9.3" wide which means the Classic Accessories Custom Fit Spare Tire Cover part # 052963751604 would be a tight fit because it is rated for use from 30" - 30.6". The next size up is the Classic Accessories Custom Fit Spare Tire Cover part # 052963751703 which is rated for use from 31" - 31.9". You should have no problems using either cover at 3000 ft. elevation.

Reply

Answer 1

There is a motor that can be added to the Pro Series Jacks part #PS1400960376. I recommend the Bulldog Powered-Drive Kit for Single-Speed Jacks #BD1824200100 which can be used for single or double jacks using connecting rod #BDCS730300.

view full answer...

Answer 2

The motor that fits Bulldog jack #BD182701 is powered drive kit #BD1824200100. The shaft on the jack is 1 inch in diameter and the pin hole for the crank is approximately 5/16 of an inch. The motor mounts to the side of the jack as you can see in the…

view full answer...

Answer 3

It sounds like you're looking at something similar to the Bulldog 2-Speed Tandem Landing Gear #BD500154 and are trying to determine whether or not the 2-speed operation also works when an electric motor is used. The answer to your question…

view full answer...

Answer 4

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 5

There isn't a motor available for the Square Jack - 25,000 lbs TJD-25100. We don't carry any jacks or landing gear that are electric with that capacity. We have a square jack that can be used with a motor made by Bulldog. The motor that fits…

view full answer...

Answer 6

You are exactly right when you mentioned an overall diameter on your ST225/75R15 tire of just under 28.3 inches. With this size tire, I recommend going with a 29 inch cover like the Adco Ultra Tyre Guard RV Wheel Covers - Black #290-3973. These…

view full answer...

Answer 7

We have three different wheels available for your 2014 Thor Chateau 22E motorhome that will work but you need to verify your pilot hole size to determine the correct fit. I have no way of knowing what size you currently have. Dexstar Dual Wheel with…

view full answer...

Answer 8

We currently have a dually wheel available by itself but no tire and wheel combos for duallies. Any tire shop should be able to mount the tires on the wheels for a nominal fee. For a 16 inch dually wheel we have the 16x6 inch with 8 on 6-1/2 bolt…

view full answer...

Answer 9

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

view full answer...

Answer 10

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

view full answer...

Answer 11

For the LT215/85R16 size tires on your RV, I recommend the Adco Ultra Tyre Gard RV Wheel Covers - White #290-3952. These covers are perfect for tires that have a diameter of 30-32 inches (yours have a diameter of just over 30 inches) and they feature…

view full answer...

Answer 12

The Pollak switch part #PK34513 that you referenced would be a great option, but I'd rather recommend you go with the Buyers Products Toggle Switch with 2 Blade Terminals - Recessed Panel Mount #337SW911 as this setup was made for your exact…

view full answer...