Will Replacing Atwood Powered A Frame Jack with Husky Jack Offer More Clearance Tailgate/Propane
Question:
Trailer currently has Atwood 4000, now dead. Issues are: 1. space between jack head and propane tank cover Atwood has about1/4 inch clearance 2. clearance for raising/lowering tailgate of 2011 Toyota Extended Cab clearance for Atwood is about 1/4 inch. Can you provide me with the following measurements: 1. distance between the centerline of the 2 1/4 inch mounting tube and the rear of the Husky head? 2. distance between the centerline and the front of the head. Also, several comments from owners indicated they could mount the unit sideways, apparently without modifying the mounting plate, i.e. they turned the head 90 degrees. Can this be done? Will appreciate your response. Thank you,
asked by: David R
Expert Reply:
Mounting the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black, Item # JET-5000 sideways will give you a much narrower jack setup than your current Atwood jack so this would work well for you without requiring you to measure.
Product Page this Question was Asked From
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Leveling Jacks
- Tongue Jack
- Steel
- 4001 - 5000 lbs
- Electric Jack
- 23 Inch Lift
- Bolt-On
- 1 Jack
- Stromberg Carlson
more information >
Continue Researching
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch - 16K GTW, 1.6K TW
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black
- Q&A: Solution for Allowing Tailgate Clearance with Powered A-Frame Trailer Jack
- Shop: Stromberg Carlson Hitching Post Chain and 7-Way Plug Holder for Trailer Jacks
- Q&A: Distance From Hitch Pin Hole to Hitch Ball of B&W Continuum BW28FR
- Shop: Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - Black
- Q&A: Clearance Needed for Tailgate to Open With Stromberg Carlson Electric Jack
- Q&A: Most Reliable Electric Trailer Tongue Jack for Travel Trailer
- Search Results: tire cover
- Search Results: rv tire cover
- Search Results: wheel cover
- Video: Review of Roadmaster Hitch Adapters - Anti Rattle 2" Hitch Extender For Tow Bars - RM-071-1075
- Shop: Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Shop: Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
- Article: How to Measure for Trailer Hitch Drop
- Shop: Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
- Q&A: Tailgate Clearance for the Stromberg Carlson Electric Trailer Jack
- Q&A: Hitch Extender to Keep my RV from Hitting My Trailer
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: Weight Distribution Recommendation for a 2024 Jayco Flight 284BHS
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Video: B&W Continuum Weight Distribution System Review
- Search Results: weight distribution hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Suspension Enhancement
- Video: Review of Reese Weight Distribution - WD Only - RE44FR
on Trailer Jack
