Trailer Hitch Recommendation that Fits All Bumper Styles of 2000 Toyota Tundra

Question

Question:

How to determine if I have a factory towable bumper

asked by: John C

0

Expert Reply:

The good news is that the Curt hitch part # 13184 fits both style of bumpers. This hitch has great towing capacities at 5,000 lbs total trailer weight and will work well for you.

expert reply by: Jameson C

0

Answer 1

The factory towable bumper on a 2002 Toyota Tundra is one that has about a 1" diameter hole drilled in the center of the bumper for a hitch ball. I have attached a photo of a Tundra with and without a factory towable bumper for you to help…

view full answer...

Answer 2

There has been quite a bit of debating back and forth over whether or not a hitch like the #13184 can be installed on your 2006 Toyota Tundra. The manufacturers have also had mixed answers on the fit over time. One thing is for certain,…

view full answer...

Answer 3

The difference between a 2000 Toyota Tundra with a towable bumper and a non-towable bumper is that the model with the towable bumper will have a cutout in the center of the bumper for a hitch ball wheres the model with the non-towable bumper will…

view full answer...

Answer 4

As long as the truck also has a 7-Way at the rear, you should not need any additional wiring components. You will need a truck specific conector to attach the brake controller. I have not seen a package with two connectors that have loose wires.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Trailer Hitch Recommendation that Fits All Bumper Styles of 2000 Toyota Tundra

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching