Recommended Trailer Hitch Receiver and Extension for 2012 Toyota RAV4 with Spare Tire and Thule Rack

Question

Question:

I just purchased a 2012 RAV 4 and already own a 2inch Thule T2 bike rack. Is there any hitch receiver model that I can purchase that will allow the bike rack to fold up without hitting the spare tire?

asked by: Josh

0

Expert Reply:

On your Thule T2 Pro XTR # TH69TX, the closest bike carrier rail when folded is 5". This is an important measurement so we can get the proper fit for your 2012 Toyota RAV4.

I recommend the etrailer Trailer Hitch Receiver # e98864 which has a hitch pin hole that measures 4 inches from the outermost part of the bumper and 8 inches from the center of the hitch pin hole to the back of the spare tire.. This will only allow a fit without the spare tire unless using a hitch extender like Curt Hitch Extender for 2" Hitch Receivers - 8" Long Item # C45791 which is my recommendation for your bike rack. This will clear your spare tire even when the bike rack is in the folded position.

The only negative is the extender will reduce the tongue weight of the hitch by 50%. Based on the tongue weight capacity rating of the hitch, your bike rack max capacity of 160 lbs won't be an issue. To secure this extender and give you an anti-rattle, I recommend # 63232.

expert reply by: Jason S

0

click to enlarge

Answer 1

The etrailer Trailer Hitch Receiver #e98864 referenced in your question is confirmed to fit your 2012 Toyota RAV4 and is the exact hitch I would have recommended. When installing the hitch to your vehicle, you may just need to remove the plastic…

view full answer...

Answer 2

At times when shipped, the mounting brackets on a trailer hitch will shift a little and need to be coaxed for alignment. Unfortunately there is no easy way to align the holes. Our installers will use a small rod to insert through the hole in the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 10

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 11

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...