How Far Out will a Hub Face be on a #84 Trailer Spindle
Question:
Can you tell me how to figure exactly where the hub face will land with #84 spindle and standard 6 on 51/2 hub #akihub-655-35-ez-k. I need to be able to figure out tread width for an off road trailer
asked by: Steve V
Expert Reply:
I can tell you roughly where the hub face will be on a #84 spindle but I would have to use # TRU74FR as an example. On this spindle from the brake mounting flange to the hub face it will be approximately 3 to 3-1/2 inches.
Since spindle # TRU64FR does not have a mounting flange you would be looking at the distance from about an 1 back from the line between the raw steel and the machined steel on the stub to the hub face.
These are the best guesstimates I can provide without having everything installed. I have attached a video with measurements you can check out.
Products Referenced in This Question
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Search Results: 3500 lbs axle
- Search Results: 3500 lb axle
- Q&A: Spindle Dimensions of a 3500 lb Axle
- Q&A: Spindles for a Trailer Hub Assembly for 3500 lb Axle
- Search Results: r20484
- Search Results: #84 spindles
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 2,000 lbs
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: #84 spindle
- Q&A: What Spindle Does Trailer Hub # AKIHUB-655-35-K Fit
- Q&A: Replacement Spindle And Hub For 6,000 lb Axle on Boat Trailer
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Search Results: leaf spring
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Article: Most Popular Wheel Bearings
- Shop: Gooseneck Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Spindles
