Should Nuts and Bolts Be Replaced When Installing New Trailer Equalizers
Question:
Your more of an expert on this than me, but, I thought that the nuts had a different thread spacing count than the bolts to tighten them. When I replaced mine, I could finger tight the nut only half way before I needed a wrench. Looking at the nut I couldnt see any oval sizing or crimping. Is this possible? And do you always replace the bolt and nut.
asked by: Robert W
Expert Reply:
The bolts would have the same thread pitch as the nuts. The reason why you could only get the nut tightened a few threads is because the nuts that are used are lock nuts.
It is recommended to use new hardware, nuts and bolts like the Zinc Shackle Bolt with Locknut, part # TRFA73Z916DLNZ, when replacing the equalizers. You would need to measure your old hardware to determine which replacement bolts you will need.
I have linked all the suspension bolts we have available and a video of replacing trailer equalizer and bolts.
Products Referenced in This Question
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Trailer Leaf Spring Suspension
- Suspension Bolts
- Boat Trailer
- Snowmobile Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Trailer Leaf Spring Suspension
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 6-1/16 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Continue Researching
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Shop: Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Shop: Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black
- Shop: Dexter E-Z Flex Equalizer Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Article: How Harvest Hosts Is Becoming the New Standard of the Camping Industry
- Search Results: suspension
- Search Results: go power flex eclipse
- Shop: Suspension Enhancement
- Search Results: equalizer
- Q&A: Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: leaf spring
- Shop: Trailer Hitch
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Wiring
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Search Results: 25580
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
- Shop: Brake Controller
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Search Results: leafsprings
- Search Results: bearing buddy
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Weight Capacity of Trailer Axle