Best ST225/75R15 Size Tires for Lionhead Bobcat Aluminum Wheels

Question

Question:

I have st225r75r15 lions head Lynx wheels with castle rock tires I would like to upgrade to best possible tires to fit this wheel any suggestions plz? Thanks

asked by: Bill C

1

Helpful Expert Reply:

The best tire that we have in the ST225/75R15 size is the Provider # TR225LRE. This tire has a load range of 2,830 lbs at 80 psi, a speed range of 81 mph, has an advanced tread design with siping for better handling in wet climates, and it comes with a 2-year limited warranty. The Provider also has tread depth bars so that you can notice the tread wear much easier.

This tire will fit perfectly with your Lynx Wheels like part # LHSL311.

expert reply by: Jon G

1

click to enlarge

Answer 1

The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the #8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the #LC66WD, or for self-adjusting brakes #K23-478-479.

view full answer...

Answer 2

By backing plates for your 2020 Grand Design Imagine 2600RB I assume you are referring to the electric brakes, and the correct replacement for those is the following: - Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies -…

view full answer...

Answer 3

You will need to verify the tire pressure required for your 235/75R15 on your sidewall. We have both the Westlake #WST54FR and Taskmaster #TA45RR which both recommend using 65psi. In my experience the only manufacturer who does not recommend using…

view full answer...

Answer 4

To confirm if you will be able to go to a larger off-road wheel and tire size there are a few things you will need to do first, as the Westlake ST235/75R15 Off-Road Tire w/ 15" Liger Aluminum Wheel #LH46FR will not fit. Your 2020 Forest…

view full answer...

Answer 5

Yes, the Westlake ST235/75-15 Off-Road Tire with Liger wheel part #LH46FR would be an exact match for what you have on your Forest River No Boundaries 19.5 and would work great. Trailer tires are not balanced like vehicle tires are. It…

view full answer...

Answer 6

The Taskmaster tires are huge sellers for us. Reason being they are priced great, they have proven to be reliable, and they have higher speed ratings than most trailer tires as they are rated for up to 81 mph and most trailer tires are only rated for…

view full answer...

Answer 7

The torque setting is 90 - 100 ft.-lbs for lug nuts on the wheel and tire combo you asked about, which is the following part number: - Westlake ST235/75R15 Off-Road Tire w/ 15" Liger Aluminum Wheel - 6 on 5-1/2 - LR D - Black #LH46FR For lug…

view full answer...

Answer 8

For self adjusting brake assemblies that fit a Lippert 4,400 lb trailer axle the correct kit you'd want is the part #LC66WD and you'd be set.

view full answer...

Answer 9

Thank you for the photo, which has your axle's capacity at 4,400 lbs; what that means is the correct self-adjusting trailer brakes are the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4,400 lbs…

view full answer...

Answer 10

The Aluminum Lynx Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black #LHSL311 should be torqued to between 90 and 100 ft lbs based on the wheel size, stud size, and wheel material. I've attached a chart to assist. I recommend the…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...