12 Inch Aluminum Wheel Similar to Lionshead Lynx Wheel

Question

Question:

Can you get this wheel in a 12 inch ?

asked by: Aaron G

0

Expert Reply:

The Aluminum Lynx Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Silver # LHSL301 is not available in that 12 inch size. For a similar wheel in that size I recommend the Aluminum HWT Series S5 Split Spoke Trailer Wheel # AM22319HWT. This is the closest option to that style we have available in 12 inch diameter.

expert reply by: Jason S

0

Answer 1

We do not have a black wheel and tire combo that has the higher 1,500 lb capacity that you are interested in. We also can't mount and balance tires here either. The only individual wheel and individual tire we have that has capacity you'd…

view full answer...

Answer 2

The Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E #AM10140 will fit on the #LH45FR wheel. This wheel is designed to be used with 5 on 4-1/2" trailer hubs which are the most common. In regard to weight, both the tie and the…

view full answer...

Answer 3

The only difference between the 1/2 Inch Lug Nut, #12CLN and #12CLN-L is the length of each. Both are bulge style which means they have a 60 degree tapered end. The inside depth of 12CLN is 1-1/4 inches. The inside depth of 12CLN-L is 1-3/4 inches.

view full answer...

Answer 4

The overall length of the Chrome Trailer Wheel Lug Nut - 1/2 inch, item #12CLN, is 1.364 inches. The overall depth of the lug nut from the farthest out part of the lugnut to the deepest point inside is 1.25 inches. We also have the Chrome Trailer…

view full answer...

Answer 5

I have a similar option for you, but the wheel used in the Kenda KR25 Radial Trailer Tire with 12" Aluminum HWT Wheel - 4 on 4 - Load Range D #AM31208HWT you were looking at is not available with a 5 on 4-1/2 bolt pattern in a wheel and tire…

view full answer...

Answer 6

I went out to the warehouse and pulled an Americana Trailer Wheel Center Cap, #AM90175, to determine the finish that is on it. Though in the pictures it looks dull, the cap is actually shiny, you can see yourself clearly but it is not as brilliant as…

view full answer...

Answer 7

We have the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Aluminum Wheel - 5 on 4-1/2 - Load Range E #AM31215. This combination is balanced and ready for installation. It has a load rating of 1,520 lbs at 80 psi and has automotive grade…

view full answer...

Answer 8

We have some 12-inch aluminum wheels that will fit your 5.30-12 tires. We have split spoke wheel with black accents #AM22319HWT. This is my favorite and what I would go with because it is a beautiful wheel. All of these wheels have the 5 on 4-1/2…

view full answer...

Answer 9

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...