Can a Hose be Threaded Onto the Valterra Water Inlet # A01-2003BKVP

Question

Question:

Is there an adapter that I can purschase so I could hook the hose right up to the inlet?

asked by: Mike

0

Expert Reply:

There isn't an adapter to secure a hose to the Valterra Water Inlet # A01-2003BKVP though we do have other options that do allow you to secure a hose. Take a look at water inlet # A01-0169LFVP as one example. I have included a link to all of the inlets we have for you to browse.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

If you don't mind drilling Jeremy I would recommend using all three mounting holes of the Dexter Actuator part #DX89FR or if you know a welder just have them weld it to the trailer. If you were going to only use two though use whichever two line…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

To install the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3200 in your 2003 Chevy Silverado 3500 the best option is the B&W Custom Installation Kit w/ Base Rails #BWRVK2500 because it will not require drilling into your truck's frame rails…

view full answer...

Answer 9

To determine the maximum trailer weight capacity you can tow with your 2006 Chevy Silverado 2500, you will need take your Gross Combined Weight Rating (GCWR) and subtract that by the the Gross Vehicle Weight (GVW) of your truck from the (GCWR) that…

view full answer...

Answer 10

To install the B and W Fifth Wheel Rail Kit part #BWRVK2500 in your 2006 Chevy Silverado requires no drilling into the frame. Holes would need to get drilled through the truck bed but that's it.

view full answer...

Answer 11

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E as…

view full answer...

Answer 12

Your picture is of a coupler that is also a brake actuator for hydaulic brakes. Very much like part #DM72VR although not exactly. Connecting the trailer to your tow vehicle is just the same as any other it's just harder to see. Under the coupler…

view full answer...

Can a Hose be Threaded Onto the Valterra Water Inlet # A01-2003BKVP

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching