Camco RV Drain Valve Review Video

This Stromberg-Carlson Motor and Switch Kit, part #LG-217884, is compatible with most brands of landing gear, including Lippert and Atwood. I spoke to my contact at Lippert, who manufactures the motor, and they confirmed that most landing gear that…

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a…

The HitchGrip Carrying Tool #303-HG-712 is only available in one size and fits a 2-5/16 inch ball. The size of the weight distribution head or ball mount really doesn't affect its use other than the weight. This is the only carrying tool we…

The only difference between the Valterra Universal Barbed Drain Valve #A01-2025VP and the Camco RV Drain Valve - Barbed #CAM22223 is the manufacturer. Apart from that, these are the same drain valves that each have 1/2" and 3/8"…

I spoke with my contact at Valterra and the distance between the mounting holes of the Valterra Universal Barbed Drain Valve #A01-2025VP is 1.45 inches. This is the same for the black version part #37204-62415.

Yes, the replacement cap for the Valterra Water Inlet #A01-2003VP is listed as part #A0120SVP on our site.

The Replacement Rubber Cap #37262105 is designed to fit over a brass city water inlet like the RV City Water Inlet #372321-B-36-A. The notch in the rubber cap will only allow for a limited amount of room to fit over the city water inlet. If you have…

If you are asking if the Camco RV Drain Valve for 1/2" or 3/8" Diameter Drain Hose - Male NPT Thread #CAM22243 can be used to drain your RV's fresh water tank the answer is absolutely it can so long as you are able to thread it into a…

There isn't an adapter to secure a hose to the Valterra Water Inlet #A01-2003BKVP though we do have other options that do allow you to secure a hose. Take a look at water inlet #A01-0169LFVP as one example. I have included a link to all of the…

The correct Camco anode rod for your Suburban SW10DE water heater is part #CAM11563. You can confirm beforehand simply by comparing dimensions. This aluminum rod measures 3/4-inch diameter and 9-1/2-inches long. Aluminum anodes will tend not to cause…

First, release the mechanism that holds the coupler onto the ball. It may be a lever or a knob that has to be turned. Some require a dual action move where you would push back or forward on the lever while lifting up on it. If you have done this and…

The Camco RV Drain Valve #CAM22243 is a 2-piece item. If you refer to the linked photo you will see it is composed of a threaded base part that will fit both 1/2-inch and 3/8-inch RV drain hoses and a handle part that inserts into the hollow cylinder…