Can I Relocate The Spring Seats On Axle To Where Spring Leafs Are Located To Widen Trailer
Question:
I have a 4x8 utility trailer that I want to widen but the tires are in the way to make completely flat. Can I place the 72inch wide axle and relocate the spring perches on the axle to where the leafs are already located. I dont carry heavy loads, max is 1200 pounds.
asked by: Donald V
Expert Reply:
When positioning a 2000 pound trailer axle like # T20BTR-7258, it is recommended that the hub face to spring seat measurement falls between 5.75" to 7.625" on each side. (11.50" to 15.25" total on both sides). (see picture). As long as your axle is within those parameters you will still be able to utilize all 2000lbs weight capacity of the axle. If you go beyond those measurements you could jeopardize the integrity of the axle.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with Standard Spindles - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- 58 Inch Long
- 72 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Dexter Trailer Leaf Spring Suspension - U-Bolt Kit For 2000 lb Round Axle - APUBR-10
- Video: Review of etrailer Trailer Axles - 60 Inch Long 2K Idler Axle - e48GR
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Search Results: hub assembly
- Search Results: 4x4 hub
- Search Results: axle flip kit
- Search Results: e25gr
- Search Results: e48gr
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Q&A: Can I turn my Boat Trailer Axle Upside Down to Gain the Clearance I Need?
- Q&A: Can Trailer Axles be Flipped Upside Down
- Q&A: Are Leaf Springs Installed Under the Axle or Over the Axle?
- Q&A: Parts Needed to Do an Over-Under Kit on a 1-3/4 inch Trailer Axle
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Trailer Spindle Got a Nick In it from a Grinder Should the Axle be Replaced
- Video: TruRyde Trailer Suspension TRSS175 Review
- Q&A: Is Larger 5.70-8 Trailer Tire a Better Option to Replace 4.80-8
- Q&A: Replacement Hubs for 1994 Shelby Haulin Trailer
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Search Results: 22 inch leaf springs
- Search Results: rims
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
on Trailer Suspension Parts
