Does Mounting Hardware Come with Fulton XLT 2-Speed Trailer Winch # F142418

Question

Question:

What other hardware is needed for the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20foot Strap - Zinc - 2,600 lbs Item # F142418

asked by: David

0

Expert Reply:

Hardware is not included with the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap # F142418 that you referenced. You'd need to supply nuts and bolts that would work best with your mount plate and the winch.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part #315-W2500D • Winch Stand, part…

view full answer...

Answer 3

I would easily recommend the Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle - 2,000 lbs #FW20000301 or the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap - Zinc - 2,600 lbs #F142418 as a replacement for your…

view full answer...

Answer 4

I believe I understand what you are asking for on the BoatBuckle Boat Winch Strap #IMF17741 and the dimension is 5/8 inch. Since it's harder to describe like you mentioned I attached a picture that has this dimension as well. If you were looking…

view full answer...

Answer 5

For quicker take-up action, you'll want a two-speed hand winch. The perfect one for your application would be the Dutton-Lainson Two Speed #DL14730. It has two gear ratios, and the one you'd want to use is 5.4:1, which means you'd need to…

view full answer...

Answer 6

Yes, you can run both of your trailer's brown wires to the single brown wire of your new 5-way. Typically this is how most 5-ways are wired. Your old one was a wishbone style connector which means it has the two wires already for that circuit.

view full answer...

Answer 7

You have a Shelby winch. Shelby is no longer in business so that exact winch is no longer available. But there are many other winches you could use even if the capacity is not exactly the same. A 3,200 pound winch such as #F412425 is a great option.…

view full answer...

Answer 8

I do have the mounting location dimensions for the Dutton-Lainson Hand Winch part #DL15440 however, the Shelby Hand Winch part #5470A is no longer available and as of October of 2016, SHELBY has gone out of business. I called my representative at…

view full answer...

Does Mounting Hardware Come with Fulton XLT 2-Speed Trailer Winch # F142418

Product Page this Question was Asked From

Continue Researching