How to Make Jumper Wire for Testing 12 Volt Trailer Lighting

Question

Question:

How can someone get a power supply for testing lights? Like the one you all have in the videos showing how the lights work.

asked by: Lloyd

0

Expert Reply:

The easiest way to get a 12 volt power wire test wiring is to use a jumper wire from a 12 volt battery. One for the positive terminal and the other for the ground. We have 10 gauge wire like part # 10-1-1 sold by the foot which would work well.

expert reply by: Jameson C

0

Answer 1

Yes it is possible to add a separate amber directional light to the trailer using part #118158. Most trailers use a 2-wire system. One wire for the running lights on the trailer and the other wire is for the brake/turn signals. You can use the…

view full answer...

Answer 2

Since you are keeping your current taillights on your Grand Design 303RLS I recommend the ThinLine LED Trailer Tail Light #STL64RCB over the #STL64RB as they have a clear lens. When you use these during the day there will be a more pronounced…

view full answer...

Answer 3

The 12v lead should be connected to the first prong clockwise from the top of your 7-way plug, but you will need to double check your existing application to confirm that it is wired this way. The color of this wire is typically black. I would…

view full answer...

Answer 4

We do indeed have an adapter that will convert your 7-way to a 12V power outlet. You'll need part #PK11896. Or if you'd prefer something a bit more permanent, you could install something like #DG6112VP in the inside wall of the truck bed and…

view full answer...

Answer 5

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

view full answer...

Answer 6

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 7

I have a few different options for you but the issue with using an electric over hydraulic actuator and factory trailer brake controller together are not particular to any one brand whether that be the actuator brand or brake controller brand, they…

view full answer...

Answer 8

It sounds as if you have an electric over hydraulic braking system on your horse trailer. Most OEM brake controllers are not compatible with electric over hydraulic actuators. If you trailer brakes are working, you may find that your actuator is…

view full answer...

Answer 9

We have been told that the Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes #K71-651 is compatible with the factory brake controllers on new trucks like your 2019 GMC Sierra, though our experience has been that they are not…

view full answer...

Answer 10

The newer factory brake controllers, like on your 2022 Chevy Silverado, are generally fine with an EOH actuator like the Dexter DX Series Electric Over Hydraulic Brake Actuator #K71-651. But there are times when there are issues which is why I…

view full answer...

Answer 11

The GM ITBC (integrated trailer brake controller) in your 2015 Chevy Silverado 2500 is indeed compatible with the Dexter #K71-651 Electric Over Hydraulic Trailer Brake Actuator. You'll also need a break away kit with a minimum 9 amp/hr battery,…

view full answer...

Answer 12

You will not need any extra parts to wire either the Dometic FanTastic Roof Vent #FV803350 or #FV807350 in place of your current fan. The MaxxFan Deluxe Roof Vent #MA00-07000K would be the route I would go thanks to its additional features. No matter…

view full answer...

How to Make Jumper Wire for Testing 12 Volt Trailer Lighting

Product Page this Question was Asked From

Continue Researching