What do the Rampage Xtremeline Running Boards Look Like when Installed on a Truck

Question

Question:

Do you have any pictures of these running boards installed on a pickup? I have a 2013 double cab Tacoma, but the picture on any truck would be fine.

asked by: Andy H

1

Helpful Expert Reply:

I have some pictures of the Rampage Xtremeline Running Boards on a Ram which I have included. This is just my opinion but I find this style of step to look better on full size trucks because of how large those end caps are.

I personally like the basic Westin look from # 23-2675 (Access Cab) or # 21-2775 (Double Cab) . Sort of an old-school look. But that is just my opinion for what it's worth!

expert reply by: Michael H

1

click to enlarge

Answer 1

Yes, we do. To add a gooseneck hitch to your 2023 Ford F-250, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch item #BW73FR. This kit includes custom brackets that mount in preexisting holes in your trucks frame. This system has…

view full answer...

Answer 2

The gooseneck prep package we are referring too when going through our gooseneck fitguide is the puck system you mentioned and not frame brackets. So if your 2023 Ford F-350 does not have the pucks then the B and W Turnoverball gooseneck part #BW73FR…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches item #BW83FR and item #BW73FR are identical kits that both fit the 2023 Ford F-350 with either the 6-3/4' or 8' bed lengths. It looks like item #BW83FR was…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

view full answer...

Answer 11

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 12

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...