Drum Hub Assembly for Lippert 3,500 lb Axle
Question:
I have a used travel trailer and need to know Item # AKHD-545-35-EZ-K will fit. The axle is from Lippert and is 3500lbs. Attached to this question are photos for reference. Here are the measurements starting from the inside: 1.38, 1.36 and1.06 inches. Thank you.
asked by: Dustin
Expert Reply:
The etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-EZ-K will fit your spindle. You didn't give me the measurement where the grease seal rides all the way in on the stepped portion right up by the brake assembly backing plate, but I can confidently tell you this assembly will fit based on the other measurements and the fact it is a Lippert 3500 lb axle.
If you look closely at your hub , you will see a hole for grease to come out for your inner bearing really close to that inner most step.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Brake Controller
- Shop: CE Smith Steel Step for Trailer Fender - 7" x 3" - Right Front/Left Rear - Qty 1
- Shop: RV Propane Gas and Carbon Monoxide Detector - 12 Volt - 2 Wire - Black
- Q&A: Parts Needed to Add Brakes to a Motorcycle Trailer
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Q&A: Dimensions of Spindle on 3,500 Pound Dexter Trailer Axle
- Search Results: 23~26~27
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Hub and Drum Recommendation for Dexter 3,500 lb Axles with 5 Lug Hubs
- Q&A: How To Find Replacement Hub and Drum For Dexter Axle
- Shop: RV Roof Membrane
- Video: Review of Alpha Systems RV Roof Repair - Non-Sag Sealant - AL73KV
- Video: Deka Wiring 12-2-1 Review
- Video: Spectro Trailer Wiring Junction Box Installation
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: brake wire gauge
- Search Results: proflex
- Search Results: rv sealant
- Search Results: trailer wiring connector
- Search Results: 7 pole wiring harness
- Search Results: duplex wire
- Q&A: How to Determine What Replacement Hub and Drum Assembly with a 5 on 4-1/2 Bolt Pattern
- Article: Top Gifts for Dads in 2024
- Q&A: How To Replace the Locking Cable On a Yakima HoldUp Bike Rack After Face Has Been Damaged
- Q&A: Lippert Crank Handle for Lippert Spare Tire Winch Assembly