What are the Dimensions of the Lionshead Trailer Wheel Center Cap # LHCS102-SI60C

Question

Question:

Im interested in product LHCS102-SI60C and need to know the size of the easy acces front side of the cap. Will it fit UPF Vault 1.980 axle caps? Thank you.

asked by: Ken

0

Expert Reply:

The Lionshead Trailer Wheel Center Cap # LHCS102-SI60C fits a 3.19 pilot hole diameter on your wheel. The overall height of the center cap is 3-1/2" and the center hole is 2" in diameter. I am not sure if it will fit over your UPF Vault 1.98 axle caps but you should be able to determine a fit with the dimensions I gave you.

expert reply by: Jon G

0

click to enlarge

Answer 1

Measure the center hole diameter on your current wheels. The center caps #LHCS102-SI60C that you referenced are designed to fit a pilot diameter of 3.19 inches. If that's what you find when you measure this would be the correct center cap.

view full answer...

Answer 2

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 4

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 5

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

What are the Dimensions of the Lionshead Trailer Wheel Center Cap # LHCS102-SI60C

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching