What Does Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 3.19 Pilot - Stainless Steel Fit

Question

Question:

I have a 2017 Coachmen Chaparral 391 QSMB. I need to replace two of the wheel center caps. I think I have lions head wheels. Is this the correct replacement for my wheels?

asked by: Bob

0

Expert Reply:

Measure the center hole diameter on your current wheels. The center caps # LHCS102-SI60C that you referenced are designed to fit a pilot diameter of 3.19 inches. If that's what you find when you measure this would be the correct center cap.

expert reply by: Jameson C

0

Answer 1

The Trailer Wheel Center Cap, #319EZ, is mainly used for decoration and does not include a seal so it is very possible for water to get behind there and not completely drain. This cap is not designed to keep water out of the hub, for that you would…

view full answer...

Answer 2

The Lionshead Trailer Wheel Center Cap #LHCS102-SI60C fits a 3.19 pilot hole diameter on your wheel. The overall height of the center cap is 3-1/2" and the center hole is 2" in diameter. I am not sure if it will fit over your UPF Vault 1.98…

view full answer...

Answer 3

Thank you for the photo of your food service trailer. It is a bit hard to tell for sure but it appears you have 8-lug wheels of the conventional steel type. If you are looking for decorative center caps for these wheels you can refer to the linked…

view full answer...

Answer 4

Based on the wheel information you've provided, you have something like the Dexstar Steel Mini Mod Trailer Wheel #AM20363, in which the Lionshead Trailer Wheel Center Cap w/ Snap-In Plug #LHCS102-SI60C you reference, will work great as a…

view full answer...

Answer 5

The Lionshead Aluminum Bobcat Trailer Wheel #LHAWSO513B has a great aesthetic and there is one option for a center cap that will fit it, which is the Lionshead Trailer Wheel Center Cap with Snap-In Plug #LHCS102-SI60C. This is an easy-to-install cap…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 9

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 10

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 11

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

What Does Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 3.19 Pilot - Stainless Steel Fit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching