The Bolts for the Curt Trailer Hitch Receiver Part # 13591 Are Too Large

Question

Question:

Purchased a hitch from you # 106351030 Bolts do not fit the vehicle what size should they be ?? Thanks in advance

asked by: Colt

0

Expert Reply:

According to the installation instructions for the Curt Trailer Hitch Receiver part # 13591 on your 2010 Chevrolet Equinox. Some of the Equinox's will require the holes to be enlarged to 17/32" to accept the 1/2" bolts. You can aquire a 17/32" drill bit from most local hardware stores if you don't already have one.

expert reply by: Conner L

0

click to enlarge

Answer 1

If you take a look at the linked instructions, you can see a listing for all the necessary hardware for the Curt #13591. For the 2017 Equinox, the hitch uses 4 M12x1.75x40mm CL 10.9 hex bolts. We offer a complete replacement hardware kit for the…

view full answer...

Answer 2

For your 2012 GMC Terrain, The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13591 the M12-1.75 x 40mm hex bolts are confirmed to fit the weld nuts of your vehicle frame. If you are having a difficult time getting the bolts to…

view full answer...

Answer 3

If you install the Curt hitch part #13591 to the torque specs listed in the install instructions you would not have to worry about the hardware ever coming loose. I attached an install video for this hitch for you to check out as well.

view full answer...

Answer 4

You are correct. The hardware used to install a trailer hitch should never be used when re-installing a hitch. We have just what you are looking for. Simply type the letters RHK in the search box on our website. You will need to fill in the hitch…

view full answer...

Answer 5

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 6

Vehicles tend to pick up dirt and road debris beneath the vehicle, so I would suggest cleaning the weldnuts really well. Soaking the holes with WD40 and using a wire brush works well. We have found that a battery terminal brush works great. We also…

view full answer...

Answer 7

The Trailer Hitch Spacer Block #RP3022 that you referenced is sold individually.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A better…

view full answer...