Rhino Rack RT-Style Roof Rack Availability

Question

Question:

Im looking for this product but cant find it on your site. Do you stock it? trackmount black 2-bar-roof-rack ja8704

asked by: Mike

0

Expert Reply:

We do have the Rhino Rack track mount roof rack you are searching for. It is made up of three parts, the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV148, the Track Mount RLTP Legs # RLTP, and the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1250B.

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

We have a very easy to install 7-way wiring kit that fits your 2020 Dodge Durango with the Tekonsha part #TK22113. This comes with everything needed for a plug and play install of a 7-way on your Durango!

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to the install instructions for the Tekonsha 7-way part #TK22113 that fits your 2018 Dodge Durango the blue wire gets routed through the grommet in the floor on the driver side into the rear cargo area and then routed behind side cargo trim…

view full answer...

Answer 7

I'm happy to assist. Attached you will find photos of the Tekonsha OEM Replacement Vehicle Wiring Harness #TK22113. These will correspond with the installation details I've also attached for your 2016 Dodge Durango.

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

Hi Andrei; yep, you're 100 percent right, you should use the 30 amp breaker. That's why for the installation kit I recommend using the Universal Installation Kit for Trailer Brake Controller #ETBC7. The #ETBC7 comes with multiple breakers,…

view full answer...

Answer 10

The application "Excluding Limited" is something that is in our fit guide so people can separate their models, because some wiring harnesses do not fit a 2014 Dodge Durango Limited. However, your 2014 Durango Limited without the factory tow…

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 12

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Rhino Rack RT-Style Roof Rack Availability

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching