Curt T-Connector Vehicle Wiring Harness Installation - 2022 Dodge Durango Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hi Andrei; yep, you're 100 percent right, you should use the 30 amp breaker. That's why for the installation kit I recommend using the Universal Installation Kit for Trailer Brake Controller #ETBC7. The #ETBC7 comes with multiple breakers,…

Yes, there is some drilling that will be required to install the Draw-Tite Sportframe #DT83MR on your 2021 Kia Forte. You will likely have to drill some new holes, and enlarge a few holes for proper installation. This hitch is rated for 2,000lbs GTW…

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

The Curt T-Connector Vehicle Wiring Harness #C56336 that you referenced is designed for your 2018 Dodge Durango if it did not come with the factory tow package, but it can certainly still be installed and used on your Durango if it does have the…

There is a way to bypass the breakaway system of your trailer but I would only recommend you do so to get your trailer to a dealer so that it can be fixed. If you were to get pulled over and the breakaway system was to be tested you would get in…

It sure will! The Curt T-Connector Vehicle Wiring Harness #C56336 you were looking at is compatible with your 2021 Dodge Durango with LED tail lights. I included a video of the #C56336 being installed for you to take a look at.

It is required to run a power wire from the Curt T-Connector Vehicle Wiring Harness part #C56336 to the battery on a 2019 Dodge Durango. The power wire is actually what provides power to the lights on the trailer. The tee connectors simply obtain the…

Yes, the Curt T-Connector #C56336 that you referenced is exactly what you want for your 2018 Dodge Durango without the tow package. If you don't already have a trailer hitch then I recommend going with the Curt Class III #C13182 which is easy to…

I attached a link that contains the installation instructions that has the torque specs for all of the installation hardware for the Draw Tite Hitch part #75162 on your 2004 Dodge Durango. Using LocTite is not required for the installation hardware…

In my opinion the Curt Hitch part #C13182 would be less visible than the Draw-Tite part #75713. If you look at the picture I attached you will see that the Hidden Hitch has a more of the cross tube visible as well as the mounting brackets. The Curt…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…