Can Hooks be Easily Removed from Curt Safety Chains # C19749

Question

Question:

Can these safety chains be shortened by removing one of the hooks? Can the hooks be removed without cutting the chain ?

asked by: Neil W

0

Expert Reply:

If you were to remove a hook from # C19749 the chains would be shorter. The only way to remove a hook, other than cutting the chain, would be to bend the "eye" end (where the chain connects to the hook) so you could then slide the chain off the long way. You couldn't go the short way because the keeper is riveted on. Are you looking for a specific chain length?

expert reply by: Michael H

0

Answer 1

Testing lights on your trailer will require a 12V power source so if you are not going to plug in a connector like #H20046 you will need a separate 12V battery. Then use the negative post of the battery to attach your ground wire to and then and…

view full answer...

Answer 2

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 3

You would want to weld the Brophy Safety Chain Mounting Bracket part #MB38 to your trailer, then you would use the quick link part #C82932 to attach the safety chains part #C80176 to your trailer.

view full answer...

Answer 4

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 7

The Edge Pulsar programmer and monitor part #EP54KR can give you up to an additional 136 horsepower and 291 ft lbs of torque.

view full answer...

Answer 8

The wireless camera I recommend going with is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF. This is the system that is prewired on most trailers so it is a very simple installation.

view full answer...

Answer 9

You definitely can use a fixed 5th wheel hitch for the puck system on your short bed 2024 GMC Sierra 2500 as long as you're towing a newer-style 5th wheel that has the tapered nose. We typically recommend the sliding hitch because it just…

view full answer...

Answer 10

Great question! From the bottom of the GearWarrior Basket to the TopShelf arms measures about 18" for the Yakima EXO Systems like part #Y44ZR that you referenced. I confirmed this with my contact at Yakima and I've attached a photo to…

view full answer...

Answer 11

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

view full answer...

Answer 12

Hey Justin, for your 2024 Chevy Silverado 2500 the big difference between the SumoSprings Solo part #SSR-207-47 and the Rebel part #SSR-203-40-2 is the weight capacity of either. The Solo can provide up to an additional 1,500 lbs of support and the…

view full answer...

Can Hooks be Easily Removed from Curt Safety Chains # C19749

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching