Parts Needed to Add a 7-Way Trailer Connector to a 1998 Dodge Ram 1500

Question

Question:

Will this work for a 1998 dodge ram 1500 pickup? Thank you

asked by: Rebecca

0

Expert Reply:

If your 1998 Dodge Ram came with a 7-Way and you need a replacement you can use Pollak 7- and 4-Pole Trailer Connector Socket, # HM40975, and Pigtail Wiring Harness, # PK11998 if needed.

The Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector, # HM48470, can be used as well but it is a hardwire connector meaning you would have to attach existing wires from the truck to the connector according to the wiring diagram I have linked for you.

If the truck came with a factory 4-Way, you would need to use Adapter 4 Pole to 7 Pole and 4 Pole, # 37185. The 4-Way on the truck would plug into this and the remaining wires would need to be hardwired. White is ground, purple connects to reverse light circuit if needed, black connects to positive battery terminal via a 40 amp circuit breaker, # PK54540.

The blue wire will connect to a wire that terminates at a connector under the driver side wheel well. To finalize installation the blue wire will need to be spliced into this point unless you do not plan on using a brake controller.

Since additional wiring will be needed to make these hardwire connections, I recommend using a 4 and 7 Way Installation Kit, # ETBC7. It comes with extra wiring, circuit breakers, and other parts needed for installation. I have included a link to an FAQ article explaining the installation of an ETBC7.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

First of all you will need the Roadmaster Direct-Connect Base Plate Kit 524470-5 #RM97RR for your 2024 Ford Maverick. The item #RM39FR you found is Roadmaster part number 524465-5 which fits certain Ford Escapes. Do understand the baseplate above…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

I checked with Voyager and their Rear View Mirror Camera Monitor item #VOM74MM weighs 1.65 lbs without the included accessories.

view full answer...

Answer 7

We do have an option that fit the description that you gave except they have a larger pilot hole diameter. Most trailer wheels are lug-centric, which the exception of some older trailers, this means that the weight rests on the lugs and not the…

view full answer...

Answer 8

No, I am sorry I can not help you John. The steel cable you're needing isn't available. It connects inside the Brake Buddy Stealth Supplemental Braking System item #HM39530 so Hopkins does not offer a replacement.

view full answer...

Answer 9

You're correct. The repalcement for your existing B12EA-22 brake would be #AKEBRK-7R-SA for the right side and #AKEBRK-7L-SA for the left.

view full answer...

Answer 10

I have a solution for you, but it will require a little wiring and it is not the Trailer Wiring Harness part #20137. There currently isn't a plug and play replacement 7-way available for your 2006 Toyota Tacoma so the best recommendation I can…

view full answer...