Is Replacement Hardware Available for Fulton Magnum Series Jack?

Question

Question:

It says Fulton magnum series on the cap, but I can’t find a part # anywhere. The stickers have rubbed off. Any place I should recheck for the #?

asked by: Eugene

0

Expert Reply:

I do not see something we carry that would be an exact replacement. If you can give me your jack's model number it would help me find if we have something that will work for you because the replacement mounting brackets match up to certain manufacturer and models of jacks.

expert reply by: Kyle S

0

click to enlarge

Eugene

5/5/2018

It says Fulton magnum series on the cap, but I can’t find a part # anywhere. The stickers have rubbed off. Any place I should recheck for the #?

Reply

Kyle S.

5/5/2018

Thanks for the info! The Fulton Magnum Series have been discontinued so there would be no parts available and there is not an exact replacement either. Your best bet would be to replace the jack with the Fulton Bolt-Thru Swivel Marine Jack # FXP10W0301, which may match up to the bracket you have, but if not you would need to replace it with Jack Mounting Bracket for Fulton Marine Jack # P9012-00. As you can see from the photo on the right, which is from a customer who installed this jack, it is very similar to what you have.

Reply

Answer 1

It sure will! The Replacement Hardware Kit for Fulton Swivel Jack #F0933325S00 were looking at is confirmed to fit your older Fulton Magnum Swivel Jack made back in roughly 2006. This was confirmed by my contact at Fulton. I included a video of the…

view full answer...

Answer 2

I do have a few options for you however, it looks to me like you have a plate bolted onto your trailer with a bracket welded to the top of that. If you are referring to the plate bolted to the frame in which the bracket is welded atop of, we do not…

view full answer...

Answer 3

A solid replacement jack that I recommend is the Square Jack w/Footplate-Bolt On, Item #MJSQ-2500B. This item is a great marine jack that has a rust-resistant zinc finish and that is built to be flexible and durable. It has a lift capacity of…

view full answer...

Answer 4

There is indeed a replacement hardware/bushing kit available. You'd need part #F0933325S00. My Fulton representative confirms that this would be the correct replacement bushing for your Fulton Magnum 1500 lb capacity jack.

view full answer...

Answer 5

Fulton jack #FXP10W0301 is meant to bolt to a specific bracket, #P9012-00. It bolts through the center. This bracket measures 4-1/2 inches by 4-1/4 inches and is meant to be welded on. The holes on the outside of the bracket are to hold the jack when…

view full answer...

Answer 6

Sounds like you are looking for a way to secure the #CE10981 to the shaft for the installation of the part #YR343R-6P. A decent set of pliers like the part #PTW88003 would do the trick. Or a set of channel locks.

view full answer...

Answer 7

I have tried to use channel locks before and they do not work all that well. You need what are called hog ring pliers such as #PTW88003. These pliers also come with fasteners but for boat trailer rollers you would want to use a retainer ring such as…

view full answer...

Answer 8

It may be possible to get another handle; I would need to know the model number of your jack in order to see if there is a compatible replacement. Do you know the model number of your jack? I was unable to find any reference to a Fulton Maximum…

view full answer...

Answer 9

Could you possibly get me the brand of landing gear that you have? It's nearly impossible to pick out the gear kit based on dimensions of the bevels but with more info that can help narrow down the search.

view full answer...

Answer 10

I spoke with my contact at Fulton and the Jack Mounting Bracket #P9012-00 could be used as a weld-on mounting bracket for the Fulton Swivel Trailer Jack #FXPD15L that you referenced.

view full answer...

Answer 11

The Fulton Adapter Kit #F500320 will allow you to mount a Fulton F2 trailer jack to your current mounting bracket like part #P9012-00. The Wide Wheel #F1413040134 version of the F2 works on gravel. It will obviously be harder to move on gravel than…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Is Replacement Hardware Available for Fulton Magnum Series Jack?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching