Wil Curt Trailer Wiring Harness C59236 Work with LED and Incandescent Lights

Question

Question:

will this work with led as well as ergular bulbs

asked by: Ty G

1

Helpful Expert Reply:

Yes, the Curt trailer wiring harness part # C59236 is compatible with incandescent and LED lights.

expert reply by: Jameson C

1

Answer 1

No. The 7-Way end in the #47405 adapter is made for the North American style of 7-Way round pins. A European 7-Way, see picture, has separate turn signals and brake lights and a circuit for fog lamps. The tail lights are also separate. You would need…

view full answer...

Answer 2

I checked your invoice and the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 you purchased will work with your 2016 Mazda 3 whether it has LED or incandescent lights.

view full answer...

Answer 3

You will need a battery isolator, like Battery Isolation Solenoid, part #PK5231201, if you plan on leaving the trailer connected to the truck when the truck is off. If you unplug the 7-Way, the trailer battery cannot drain the truck battery. If you…

view full answer...

Answer 4

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 5

That will depend on the amount of brake axles your trailer has. . The 20 amp breaker like #9506P is for 1 and 2 axle brakes, and the 30 amp like part #38630 is for 3 and 4 axle brakes

view full answer...

Answer 6

For a trailer hitch confirmed as a fit for your 2013 Scion xB we have the Curt part #C12490 which would fit and work well. It has the highest capacities of all of the trailer hitches we offer for your vehicle so it's a great option. I attached an…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Wil Curt Trailer Wiring Harness C59236 Work with LED and Incandescent Lights

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching