Replacement Hardware Kit for Draw-Tite Trailer Hitch 36440

Question

Question:

Hello, I would like to order the proper installation fastener kit for this hitch. Can you advise the proper part number or how to order this through your web site? Thank you

asked by: Christopher C

0

Expert Reply:

You can get replacement hardware for Drat-Tite Trailer Hitch, 36440. You will need part # RHK. All you will need to do is type in the hitch number, 36440, in the box on the product page, then select the manufacturer from the drop down menu, Draw-Tite, and then click Add to Cart.

expert reply by: Michael H

0

Answer 1

The Draw Tite Hitch part #75751 that you referenced has been confirmed to fit your 2009 Mercury Mariner. In order to order replacement hardware for it you will need part #RHK. Once on the product page you will need to select Draw Tite as the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

We categorize our fenders by the size wheels they're compatible with, as you can see by clicking the link I've provided for you. I don't have any reference that will tell me the exact replacement fender that's needed for your boat…

view full answer...

Replacement Hardware Kit for Draw-Tite Trailer Hitch 36440

Product Page this Question was Asked From

Continue Researching