Rhino Rack Square Euro Bar Compatibility with Yakima SNAR Brackets

Question

Question:

Will these mounts work with the Rhino Rack 2500 bars that are 1-1/4inch wide x 7/8inch tall?

asked by: Steven S

0

Expert Reply:

The Yakima SnapAround Mounting Brackets (SNARs) - Round and Square (QTY 4) # Y8810135 will work with the Rhino-Rack square bars like # RREB150B. The 1-1/4 inch by 7/8 inch dimensions are the standard for Rhino-Rack and Thule square bars as well as most other manufacturers.

expert reply by: Jason S

0

Answer 1

The Thule SquareBar Crossbars - Steel - 60" Long - Qty 2 #TH712500 are slotted on the bottom for the fit with the towers. I also have the similar Rhino-Rack Euro Bar Crossbars - Steel - Black - 59" Long - Qty 2 #RREB150B which has that same…

view full answer...

Answer 2

Yes, Rhino-Rack has 59 inch square bars #RREB150B. At 5 inches longer that will add 2-1/2 inches to each end of the bar and put you at 4-1/2 inches. The Hullavator and Hullavator Pro, #TH898, require 4 to 8 inches though, not 6 to 8. So that 4-1/2…

view full answer...

Answer 3

The Thule Podium 460 you referenced for old square bars has been discontinued so that is why the expert answers suggest using the Evo Fixpoint Feet #TH49SC for use with the new Thule SquareBar that have a slot in the bottom like the aero style bars.…

view full answer...

Answer 4

Thule square bar accessories will often adapt to work with the Rhino-Rack Aero Bar Crossbars #RRVA118B-2, 2500 Series Legs #RRRLKVA, and Custom DK Fit Kit #DK399 without issue. This roof rack is a confirmed fit for your 2014 Chevy Sonic. If you go to…

view full answer...

Answer 5

The good news is that the roof rack manufacturers all decided to use the same channel dimensions so the roof rack accessories for roof channels basically all are interchangeable between (most) brands. Thule and Rhino Rack do work together just fine.…

view full answer...

Answer 6

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

Answer 7

Rhino Rack square bars like the #RREB126B are 1-3/16 inches wide and 13/16 inches tall. Thule square bars like the part #TH712400 are 1-1/4 inches wide and 7/8 inches tall. So while they are very close to the same size they are different.

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Rhino Rack Square Euro Bar Compatibility with Yakima SNAR Brackets

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching