Replacement Trailer Taillight Assemblies for 2015 Grizzly 1754 SC

Question

Question:

Hello. Im looking for a replacement tail lamp assembly on a 2015 Tracker Grizzly 1754 SC trailer. There is corrosion inside on the bulb terminal so I will need the complete assembly. Please let me know which parts you sell that fit this trailer. Also, please let me know if there is an LED upgrade kit as well. thanks.

asked by: Ryan

0

Expert Reply:

I looked up pictures of your 2015 Tracker Grizzly 1754 SC and it appears to have the trailer taillights part # ST36RB for the right hand side and the part # ST37RB for the left hand side.

expert reply by: Jameson C

0

Answer 1

The Lippert 2420801 hub is an 8k hub with an 8 lug bolt pattern so for a replacement you'd just need the part #8-285-10UC3-A.

view full answer...

Answer 2

It's a wire color difference but not a function difference on the pins of the 7-way. The difference comes from the fact that the two different styles are representative of two different areas that uses trailers. Traditional is usually seen on…

view full answer...

Answer 3

The lights you have on your trailer are #ST37RB and #ST36RB. The replacement lenses are #A39RB for the front lens and #A37RB for the side marker.

view full answer...

Answer 4

For your 2022 Thor Outlaw 29J motorhome on a Ford E450 chassis, the correct steering stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM47MR. I verified the fitment of the #RM47MR directly with Roadmaster for you, and it does come with…

view full answer...

Answer 5

I may have a solution for you depending on the type of connector you have. The Optronics Aero Pro Combination Trailer Tail Light item #ST37RB you need is 7 7/8" long by 3 1/4" wide. We have two lights of the same size that attach by plugs.…

view full answer...

Answer 6

To use the Detail K2 II snow plow part #K2RAMP8219 on your 2021 Toyota Tundra the correct install kit is the part #K285113.

view full answer...

Answer 7

The equalizer of a tandem axle trailer is not the balance point of the trailer. I would recommend putting the wheel chocks of your trailer as far forward as you can in the trailer. This will help prevent any potential sway that can occur from not…

view full answer...

Answer 8

When securing your motorcycle inside your enclosed 12 foot long trailer using a chock like the Tow-Rax #TWSPWM the most important factor to consider is the trailer's tongue weight. You will just want to make sure that its tongue weight with the…

view full answer...

Answer 9

The SAE STIAP2 04 DOT number you provided is a DOT approval number, which states that the lens is compliant with DOT regulations. Because of that, that number isn't typically a good identifier for finding a replacement lens. However, in this…

view full answer...