bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2001 Chevy Suburban 2500  

Question:

I have a 2008 Diesel Bounder Motorhome and I want to tow a 2001 Suburban 2500 4WD, I need to know what I need for towing and brakes. Thank you

0

Expert Reply:

First you'd need the correct base plate kit for your 2001 GMC Yukon XL 2500. For that you'd want the Blue Ox kit part # BX1633 which is a confirmed fit and will work well.

For a tow bar the most popular option that would work well is the Blue Ox part # BX7380 which is very easy to use and comes with safety cables.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C

Products Referenced in This Question





Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>