Recommendation For Replacements Of 10 Inch Hydraulic Drum Brakes For Single Axle Boat Trailer
Question:
Hi, My single axle boat trailer needs new 10 inch hydraulic drum brakes. The previous brakes lasted only 3 seasons before rusting out. I use the trailer in salt water, and would like to have a free backing brake system that will last longer. the previous parts were UFP #32681L/R. I see that you have several marine brake systems available...e.g. dacromet, galvanized, galphorite. Which would have the best life on a galvanized trailer used in salt water? Also, the hubs are rusty too...any reason I should change them also, or just sand them a bit?
asked by: Alex P
Expert Reply:
Based on your information, I recommend the Hydraulic Brake Kit, Item # AKFBBRK-35-D. This kit is marine-grade, has Dacromet-coating which resists corrosion, and works well with salt water applications. The kit fits most standard hub-and-drum assemblies including Dexter, Lippert, and AL-KO. It fits a 4-bolt mounting flange pattern, works with 3,500-lbs axles, and has the free-backing feature. Left-hand and right-hand brake assemblies and mounting bolts included.
Regarding your hubs, you can sand them but I recommend considering new ones like the Trailer Hub and Drum Assembly, Item # AKHD-545-35-G-K. These are galvanized and great for marine use like your situation. They fit 3,500-lbs axles and work with most axle manufacturers like Dexter, Lippert, and AL-OK. They fit a 5 on 4-1/2 bolt pattern and work with an inner bearing like Item # L68149 and and outer bearing like Item # L44649. They work with 10 inch brake assemblies and this kit includes inner and outer bearings, races, seals, grease caps, and lug nuts.
If these will not work for you, let me know your axle weight capacity (normally on a tag attached to axle), your inner and outer bearings (stamped on hubs), and your bolt pattern and I will make correct recommendations.
I have also attached articles, videos, and links to our available inventory for you to check out.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Solution for Needing Replacement Brake Shoes for etrailer Hydraulic Brake Assemblies
- Video: etrailer Hub And Drum Assembly Installation
- Q&A: Is Demco Hydraulic Brake Kit # 40716-15 Sold As Pair or Individually
- Q&A: How to Determine Which Drum Brakes to Get
- Q&A: Brake Assemblies For 3,500Lb Surge Brakes That Allow For Backing Up Without a Reverse Lockout
- Q&A: Recommended Replacement Brake Assemblies For Eagle Trailer Drum Brakes
- Search Results: trailer bearings races seals caps
- Search Results: 10" brake drum
- Search Results: 40716~15
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Dexter Hydraulic Brake Kit - Free Backing - 10" - Left and Right Hand Assemblies - 3,750 lbs
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Mounting Bolts and Hardware for 10" Brake Assemblies
- Shop: Demco Hydraulic Brake Kit - Free Backing - Galvanized - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: 44649
- Shop: Brake Controller
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: 68149
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: bearing buddy
- Shop: Gooseneck Hitch