Comparing Curt Q24 5th Wheel Legs To Curt Q25 Legs

Question

Question:

Is there any difference between the two? Could you put a Q24 hitch head on Q25 legs? Or vice versa? They look to be identical but one is less expensive.

asked by: Tom

0

Expert Reply:

The Replacement Base Legs for Curt Q5 and Q24 5th Wheel Hitches # 16125-SK13 and the Replacement Base Legs for Curt Q25 5th Wheel Trailer Hitch # C16963 are slightly different. My contact at Curt said the bolt pattern in the same, so you can put either legs on either hitch head, but the A25 legs are a slightly different angle and use a slightly thicker metal.

expert reply by: Jason S

0

Answer 1

A Reese 5th wheel hitch like the 30032 or 30033 you mentioned fits what are called industry-standard base rails, and the answer to your question is yes, the Curt E16 5th Wheel Trailer Hitch #C16115 will absolutely fit the same base rails as a Reese…

view full answer...

Answer 2

Sounds like either your fifth wheel rails weren't install properly in the bed of your truck or your fifth wheel hitch has somehow been bent. What you will need to do is check out the picture I attached that has all of the industry standard…

view full answer...

Answer 3

We have just what you need. The leg kit you need is the Curt Q25 leg kit part #C16963 which will allow your to install your Curt Q25 head in factory above the bed rails.

view full answer...

Answer 4

We do have the replacement 5th wheel hitch legs for your Head Unit for Curt Q24 5th Wheel Trailer Hitch #C16545. - Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep Package #CU53FR. The Curt OEM 5th Wheel Hitch Legs for Chevy/GMC Towing Prep…

view full answer...

Answer 5

Both the Curt A25 #C24FR and the B&W Companion #BWRVK3715 have a 25,000 pounds towing and 6,250 pounds of vertical load capacity, but there are a few differences between them and I have a couple listed below. First, The B&W can be…

view full answer...

Answer 6

The Curt A25 #C16046 and Q25 #C16049 are both excellent 5th wheel hitches however there are a few upgrades on the newer Curt A25 #C16049 that make it the superior hitch and my personal recommendation. The primary difference between the two models…

view full answer...

Answer 7

It looks like you are referring to step 7-d of the installation instructions for the 5th wheel trailer hitch installation kit #RP50140-58, linked for reference. Step 7 refers to installing the rear frame brackets under the truck. The holes drilled…

view full answer...

Answer 8

Yes, the Curt Q20 5th Wheel Trailer Hitch Head part #C16530 will work with your Curt Q5 5th Wheel Trailer Hitch Base part #16125-SK13. Therefore, you don't need to buy an entire new hitch as you can just replace the head.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Comparing Curt Q24 5th Wheel Legs To Curt Q25 Legs

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching