Replacement Axle-Less Suspension System for a Jet Ski Trailer
Question:
I have a double jet ski trailer and need a new axle for it. I a, having trouble finding a good replacement axle with 5-lug hub. It is 77 inches to spring center and 95 inches to hub face. Any suggestions?
asked by: Chad
Expert Reply:
I do have an option for you but we unfortunately do not have a replacement straight axle with a 77" spring center and 95" hub face measurement. Instead, I recommend checking out one of our axle-less systems like the Timbren Axle-Less Trailer Suspension System part # A35RS545E with brakes or part # A35RS545 without brakes.
The Timbren system is an excellent option for you. They are very easy to install and actually replace the leaf springs with rubber springs which work to deliver a smooth, stable ride regardless of the load size. I have attached a review/install video of them for you to give you a better idea of how they operate.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Shop: Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Recommended Timbren Axle-Less Trailer Suspension System to Replace 3500 lb Axle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: axle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: leaf spring
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: bearing buddy
- Shop: Suspension Enhancement
- Video: etrailer Easy Grease Spindles Trailer Axle Beam Installation
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch
- Search Results: lug nut