How to Install the Curt Support Strap Part # 18050 on a Smart Fortwo with Platform Style Bike Rack

Question

Question:

I purchased a CURT hitch for my 2014 Smart Fortwo Electric Drive # C11020, and it mentions that it requires the use of stabilizing straps #18050 with all non-trailer accessories such as bike racks - I noticed in other questions you provided a video that shows how to install these straps when using a bike rack, however how would this install on a Smart with using a tray style hitch rack? Thanks!

asked by: Stacey

0

Expert Reply:

You are correct that the Curt Trailer Hitch Support Strap part # 18050 will be required for all non-towing applications in order to honor the warranty of the Curt Trailer Hitch Receiver part # C11020 on your 2014 Smart Fortwo. As far as installation goes, this will really depend on the bike rack and vehicle it is used on. There is not a specific point on the rack or vehicle that the strap will need to be attached to but I recommend wrapping the strap around the center section of the platform rack where the upright hook mounts and then to either the bottom or top of the hatch on your Smart Fortwo using the included car clip. I have attached a few photos to assist.

expert reply by: Conner L

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 9

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 10

The underside of the standard 2023 Hyundai Elantra is different than the hybrid model of the 2023 Hyundai Elantra Hybrid, which is why the #DT75MR won't fit. There is a hitch designed specifically for the hybrid which has different attachment…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

How to Install the Curt Support Strap Part # 18050 on a Smart Fortwo with Platform Style Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching