Determining Hanger Spacing and Height Clearances Needed for Trailer
Question:
bout new springs and hangers for trailers.. cut old hangers off.. like to see if you can help me determine the spacing for the front , center, and rear hanger as well as what clearance should you shot for when trailer is empty
asked by: Chad
Expert Reply:
I've attached an article to help you with axle placement based on tongue weight. There is some math you will need to do for your specific trailer to find either the single axle location or the location of the center hanger in your case for a tandem axle application.
There are different hanger sizes to provide the height needed but you will need to know your tire diameter and then account for 4-1/2 or more inches of clearance above the tire to the underside of the trailer to ensure you have enough clearance for the suspension to work properly.
To further assist with hanger spacing, I've attached the Tandem-Axle Trailer Hanger Kit for Double Eye Springs # APT5 and a reference to the hanger spacing of this kit offers for proper function. Please see attached photos and spacing based on axle diameter.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: apt 5 hanger kit
- Search Results: trailer suspension kit
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Measuring the Distance Between Axles Using Suspension Kit # APT5
- Q&A: Where Place Center Hanger of Tandem Axle when Building Trailer
- Q&A: How To Determine Axle Spacing On Tandem Axle Dump Trailer Using 30-1/4" Leaf Springs
- Q&A: Where Should Front And Rear Suspension Hangers Be Welded On A Tandem Axle Trailer With 23" Springs
- Search Results: 7 pin trailer wiring harness
- Search Results: led clearance lights
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Suspension Enhancement
- Search Results: equalizer
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Search Results: leaf spring
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Determining Correct Shackle Strap Size for Top Brand Tandem Axle Trailer
- Shop: Trailer Hitch
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Search Results: leaf springs
- Q&A: Proper Position of Equalizer and Shackles on Trailer Suspension
- Shop: Trailer Wiring
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Article: How to Raise Your Travel Trailer Height
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Shop: Fifth Wheel Hitch
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
on Trailer Suspension Parts
