Troubleshooting Furrion Wireless Observation System Has No Power to Pair the System
Question:
I plugged my Furrion monitor and camera in for the first time to pair the system. I do not have power to either. I unplugged them, plugged in my phone charger and I have power to the lighter. Why do I not have power? Am I doing something wrong?
asked by: Tonya W
Expert Reply:
Since you have power at the 12V outlet, you will to make sure you have power getting to the camera itself. When using a system like the # FOS43TASF you will need to make sure your camera is getting 12V power. If you have the prewired RV Trailer, the power to the camera will only be sent when you are shifted into reverse. That camera is wired into the reverse light function of your trailer. You can change this to the running light if you want to splice into that wiring for function anytime your running lights are on your trailer.
Product Page this Question was Asked From
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- Wireless Signal
- 120 Degrees
- Dashboard Mounting Bracket
- Suction Cup Mount
- Below Rear Clearance
- 4.3 Inch Display
- 1 Camera
- Furrion
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1
- Shop: 12V PWM Filter for RV Backup Camera Systems - Hardwire
- Search Results: vgr64vr
- Shop: 7-Way Vehicle Power Adapter for Furrion RV Observation Camera
- Q&A: Furrion Vision S Camera Issue Fix For A 2022 GMC Sierra 2500
- Q&A: Furrion Backup Camera Compatible With A 2022 Chevrolet Sivlerado 3500 HD
- Q&A: Solution for Chevy Silverado Where Furrion Vision S Side Cameras Wont Come On
- Shop: Rear View Safety Female Power Cable
- Shop: Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads
- Q&A: How to Pair Furrion Wireless RV Camera to Monitor
- Q&A: No Power To Furrion Vision S Wireless RV Backup Camera When Plugged In
- Q&A: Troubleshooting A Furrion Camera System That Won't Power On With 2020 Ford F-150
- Q&A: Troubleshooting Furrion Vision S Monitor and Camera Not Pairing
- Shop: Rear View Safety Camera Extension Cable - 26' Long - Male/Female Connection
- Shop: Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System
- Article: How to Raise Your Travel Trailer Height
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Shop: Trailer Wiring
- Video: Choosing the Right Trailer Wiring
- Search Results: brake controller
- Video: Choosing the Right Brake Controller
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: awning
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Solera Replacement Awning Fabric Measurement and Installation
- Search Results: backup camera systems
Jeff T.
1/13/2020
I have a furrion wireless back up camera on my 5th wheel. Lets start out with the camera worked good up until today. The screen will not power up. Checked screen power cord with dvom and getting 12.6 volt.s to screen unit. The light on left side is not lit up anymore and the unit does not come on ? The camera on the rear of the 5th wheel is powering up has blue lights lit. Is there a eternal battery in said screen unit? Or internal fuse? Any ideas or suggestions?Serial number on unit is 652v02-052015-1-00308