30 Amp Male Plug Without Handle for Compatibility with Small Door On Trailer

Question

Question:

Do you have a 30 amp male plug that does not have a handle? I have a very small door on the trailer and the ones with a handle won’t fit.

asked by: Ken N

0

Expert Reply:

For a 30 amp male plug without a handle, we have the following:
Mighty Cord RV Power Cord Adapter - 30 Amp Twist Lock Female to 30 Amp Male - 12" # A10-3030DBK
Mighty Cord RV Power Cord Adapter - 50 Amp Twist Lock Female to 30 Amp Male - 12" # A10-3050DBK
Mighty Cord Dogbone RV Power Cord Adapter - 50 Amp Female to 30 Amp Male - 12" # A10-3050FBK

For a power cord, we have these:
Mighty Cord RV Power Cord Adapter - 50 Amp Twist Lock Female to 30 Amp Male - 25' # A10-3050EDBK
Mighty Cord Detachable RV Power Cord - 30 Amps - 25' # A10-3025EDBK.

expert reply by: Jason S

0

Answer 1

The Bulldog Lifelong Trailer Coupler Lock part #BD580403 is an excellent option to secure a trailer. It will prevent the trailer from being coupled as well as preventing the trailer from being uncoupled. The ball-bearing design really makes for a…

view full answer...

Answer 2

Yes, the Mighty Cord RV Power Cord - 30 Amps - 25' Long #A10-3025EDBK will work great for your application. It doesn't have the fancy fault lights that your current wiring does so you might consider using something like the Camco RV Power…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install…

view full answer...

30 Amp Male Plug Without Handle for Compatibility with Small Door On Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching