Trailer Hitch for a 1979 Buick Estate Wagon

Question

Question:

Does this fit or do you have a trailer hitch that will fit a 1979 Buick Electra Estate Wagon

asked by: Lamar

0

Expert Reply:

There is only one trailer hitch that fits the 1979 Buick Estate Wagon. It is # C12009. But this is a Class II hitch with a 1-1/4 inch receiver rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. There isn't a higher capacity hitch available for this vehicle.

expert reply by: Michael H

0

Answer 1

I do have an option for you but there is only one trailer hitch option for a 1994 Chevrolet Caprice and that's the Curt Trailer Hitch Receiver part #C12009 which is a class II. It however can still be used for towing up to 3,500 lbs but…

view full answer...

Answer 2

We have a class II hitch that will fit your 96 Buick Roadmaster. The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Item #C12009. We haven't had the chance to install this hitch on a vehicle, but it is rated for a 50 minute…

view full answer...

Answer 3

You probably can adjust the angle of the hook on the Curt stabilizing strap #18050 to allow for a better fit on your 2011 Volkswagen Golf. Do note this this modification may void the item's warranty, however. You would want to allow the hook to…

view full answer...

Answer 4

The only trailer hitch receiver that is available for your 1993 Buick Roadmaster Sedan is the Curt Trailer Hitch Receiver #C12009. It is a Class II hitch with a 1-1/4" receiver as you mentioned. It has a Gross Trailer Weight (GTW) of 3,500 lbs…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 11

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 12

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Trailer Hitch for a 1979 Buick Estate Wagon

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching