Replacement Cradles and Straps Needed for the Hollywood Racks Commuter # HR2500

Question

Question:

can you purchase just the clamps the bike sits on and straps that slide onto the bar?

asked by: Laurie M

0

Expert Reply:

We do have replacement cradles and straps for the Hollywood Racks Commuter # HR2500 that you referenced.

The part # HR750-P on our site comes with 2 cradles and 2 straps to secure 1 bike. If you need to replace enough for 2 bikes then you need 2 of these kits.

expert reply by: Jon G

0

Answer 1

The #853-7887 is designed to fit a 1 inch diameter tube. If the arms of your rack are 1 inch in diameter this cradle would work, and then for a strap use #852-3006-001. For a anti-sway cradle you would want the part #853-7758.

view full answer...

Answer 2

Installation of the T3 cradle replacement strap is pretty straight forward. You will need to remove the end cap from the end of the bike support arm, a Phillips screw typically holds the cap in place. Next use a small amount of soap and water to help…

view full answer...

Answer 3

From the pictures you sent in it looks like you have an older version of the SportRack Ridge Swing 4 Bike Rack #SR2415. I do have some replacement parts that could work, but unfortunately there aren't any specific replacement pieces. What I'm…

view full answer...

Answer 4

Thanks so much for the photos, they were very helpful. To replace all four cradles, what you need is two of the Replacement SuperCush Anti-Sway Cradle and ZipStrips #8880598 (which has the upper and lower ZipStrip) along with two of the Replacement…

view full answer...

Answer 5

There are indeed some bike rack replacement parts that might be adaptable to brands and models of racks for which they were not intended. Usually an entire cradle assembly like #853-7887 from Thule, which slips over one of the rack arm tubes, is…

view full answer...

Answer 6

It looks like you purchased the Thule T3 Cradle, #853-5829, and the T3 Strap, #753-3535. These two items should work well together so I made a short demonstration video for you. If you think you may have received a different strap or are missing a…

view full answer...

Answer 7

Yakima does not offer just the screw that attaches to the bottom of the Ridgeback cradles so best option we can provide is a new cradle with the part #8880597. Or if you took one of the other screws to a local hardware store they should be able to…

view full answer...

Answer 8

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

view full answer...

Replacement Cradles and Straps Needed for the Hollywood Racks Commuter # HR2500

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching