Solution for Needing Replacement Cradle Bolt for Yakima Ridgeback Bike Rack

Question

Question:

I own a 4 bike Yakima rack ridgeback is the name I think. I have lost one of the bolts that goes on one of the cradles. Where can I get that. It partly threaded. But dont know what size it is. It allows the cradle to swivel bit also holds it in place. Any help is appreciated Henry

asked by: Henry G

0

Expert Reply:

Yakima does not offer just the screw that attaches to the bottom of the Ridgeback cradles so best option we can provide is a new cradle with the part # 8880597. Or if you took one of the other screws to a local hardware store they should be able to match it for you.

expert reply by: Jameson C

0

Answer 1

It looks like you purchased the Thule T3 Cradle, #853-5829, and the T3 Strap, #753-3535. These two items should work well together so I made a short demonstration video for you. If you think you may have received a different strap or are missing a…

view full answer...

Answer 2

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 3

Thanks so much for the photos, they were very helpful. To replace all four cradles, what you need is two of the Replacement SuperCush Anti-Sway Cradle and ZipStrips #8880598 (which has the upper and lower ZipStrip) along with two of the Replacement…

view full answer...

Answer 4

At the ends of the arms on Thule bike racks that take the Hold Fast cradle #7521513002 there are end caps that usually have to be removed in order to remove the old cradles and put on the new ones. These caps can either have a screw holding them on…

view full answer...

Answer 5

From the hitch pin to the mast is approximately 9" on the Yakima LongHaul, #Y02476.

view full answer...

Answer 6

Since you got the FullSwing in 2016, and your cradle has a black release button (thank you for the photo by the way), unfortunately the 8890297 you got are incorrect. So what you need are the Replacement ZipStrip Straps for Yakima SuperCush Bike Rack…

view full answer...

Answer 7

If you measure the arm tube diameter on your BigHorn and find that it's 1-5/16 inch the frame cradle replacement part #8880598 will fit and work great.

view full answer...

Answer 8

Yes, you can replace your current ST225/75R15 Load Range C tires with heavier duty load range E tires of the same size, #TR225LRE, and mount them on your current wheels. Just keep in mind you're still limited to the lowest component between the…

view full answer...

Solution for Needing Replacement Cradle Bolt for Yakima Ridgeback Bike Rack

Product Page this Question was Asked From

Continue Researching