Availability of Drill Adapter for Trailer Winch

Question

Question:

Do you make a drill adapter like this? If not, you should!

asked by: Tom H

0

Expert Reply:

If you had a Dutton Lainson DLB winch we have the adapter part # DL6456 which allows you to crank the winch with a power drill.

expert reply by: Jameson C

0

Answer 1

The square portion of the Dutton-Lainson Drill Drive Socket Adapter #DL6456 measures 13/16" x 13/16" and fits a 1/2" electric drill. I have attached a photo to demonstrate this.

view full answer...

Answer 2

The Dutton-Lainson Drill Drive Socket Adapter #DL6456 has an inner diameter of 0.7125".

view full answer...

Answer 3

The Dutton-Lainson Brake Winch with TUFFPLATE Finish #DL15721 has the following dimensions: Handle - 9-3/4 Mounting plate - 7 long x 4-1/2 wide x 5 tall Mounting plate to furthest point of gear - 9-1/2 Mounting plate to top of gear - 7-1/2 Large hole…

view full answer...

Answer 4

The brake on the Dutton-Lainson Hand Winch #DL15761 is automatic. It has both a friction brake as well as a mechanical brake. When winding in the winch cable in you will hear a sharp clicking noise of the winch locking into position. To release cable…

view full answer...

Answer 5

According to Dutton-Lainson, you can indeed use the #DL6454 to replace the existing handle on your DLB800A winch so you can utilize the #DL6456 drill Drive Socket Adapter. I've linked to a description video for the #DL6456 adapter.

view full answer...

Answer 6

If you install the #DL6454 Replacement Removable handle kit to your Dutton-Lainson DLB1200A hand winch which we carry as part #DL14934, the #DL6456 drill drive socket adapter would indeed be compatible.

view full answer...

Answer 7

The Dutton Lainson winch part #DL15721 is the same as the DL2500A that you have now and has an automatic brake. This would work well for you as a replacement. Typically when picking out a winch for a boat trailer the ratio of boat trailer weight to…

view full answer...

Answer 8

The adapter part #DL6456 fits 1/2 inch drills like what most hand drills are. It is not a standard hex socket so if you were wanting to try to use a socket you already have in place of it that would not be possible. The adapter is a square shape that…

view full answer...

Answer 9

The socket/drill adapter part #DL6456 that you referenced only fits worm gear style winches like the #DL11011 from Dutton Lainson and would not fit the winch part #DL14725.

view full answer...

Answer 10

The Dutton-Lainson #DL6456 Drill Drive Socket Adapter is only compatible with DLB series brake winches, so it wouldn't work with the #DL14730 winch you'd mentioned. Dutton-Lainson offers a 2500 lb capacity winch as part #DL15761 which is…

view full answer...

Answer 11

The Replacement Removable Handle Kit for Dutton-Lainson DLB-Series Brake Winches - 9-3/8" Long #DL6454 is a direct fit for the Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - Freewheel - 1,500 lbs #DL14996 you asked about. You…

view full answer...

Answer 12

The instructions for the #DL11011 state, "to minimize heat build up and possible winch damage, do not exceed 600 rpm." So, although you can use a drill with the Dutton-Lainson Drill Drive Socket Adapter for DLB Series Winches #DL6456 to…

view full answer...

Availability of Drill Adapter for Trailer Winch

Product Page this Question was Asked From

Continue Researching