Trailer Hitch Recommendation for 2018 Leus NX 300

Question

Question:

I want a 2 inch hitch for my 2018 Lexus NX 300, does this Curt hitch fit?

asked by: Matthew

0

Expert Reply:

Yes, the Curt hitch part # C13337 is a confirmed fit for your 2018 Leus NX 300 and would be a great option. This hitch has a 2 inch opening which means it'll have higher towing capacities (3,500 lb trailer weight) and will have more hitch accessories made for it.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Hello Dan. Our rule of thumb is that you want at least 3" between the tire and the fender, and at least 1" between the inside of the tire and the frame of the trailer. If you need additional clearance there are ways to do this, but using…

view full answer...

Answer 8

Yes, we have the Draw Tite hitch part #76271 that fits your 2023 Subaru WRX. This has a 2 inch hitch opening, and easy install, and great towing capacities so it would work great for you.

view full answer...

Answer 9

The trailer hitch options we have available for a 2020 Lexus NX 300h are from Curt, the Curt Trailer Hitch Receiver part #C12172 for 1-1/4" or part #C13337 for 2". I recommend the 2" option because it allows for a much greater variety…

view full answer...

Answer 10

I recommend an axle-less system for your trailer. The axle-less systems can be mounted to the trailer frame. This means you do not need the springs and hangers and you aren't restricted by the width of the trailer frame. If you need electric…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #13432 you found is for Jeep Wranglers and will not be able to fit your 2023 Ford Bronco. While we currently have not received any updates that the Curt Trailer Hitch Receiver #C76WR which fit the 2021 and 2022 model…

view full answer...

Answer 12

With the Curt trailer hitch #C13337 installed on your 2018 Lexus NX 300 there may be some interference with the liftgate foot sensors, but you will still be able to use them. You will simply need to move your foot to the left or right of the receiver…

view full answer...

Trailer Hitch Recommendation for 2018 Leus NX 300

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching