Is the Bearing Kit # BK1-100 Correct for my Trailer
Question:
Can you recommend wheel bearing kit for a small one axil trailer? It has 4 lugs on each wheel. It is not marked for who manufactured it. Here are spindle and hub measurements. Spindle B measure seal: I/S 1.30 in, O/S 1.21 in C measure spindle I/S bearing 0.98 in D measure spindle O/S bearing 0.98 in Hub Outer race diameter 2.04in Inner race diameter. Inner race diameter is not known specifically but must be about 1.0 in. Inner seal diameter 2.02 in Outer hub grease cap diameter 2.02 in Outer race marked China 30205
asked by: Kurt
Expert Reply:
The closest bearing and seal that we have to what you measured is found in the bearing kit # BK1-100 which is for a BT8 spindle. It comes with 2 bearings, 2 races, 1 grease seal, and a cotter pin.
The bearing part # L44643 is for both the inner and outer bearing. It has an inner diameter of 1.000" while the included race, part # L44610, has an outer diameter of 1.98" which sounds like what you have.
For the seal in the kit we have part # 34823 which has an inner diameter of 1.249" and an outer diameter of 1.983".
Some of the dimensions that you gave look like they may not match up correctly. If you could take your measurements again with a digital caliper and note them to the 3rd decimal place I can help you verify if this is the correct fit or not.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Loadstar K399 Bias Trailer Tire - 215/60-8 - Load Range D
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Search Results: 20.5x8.0 10 tire
- Q&A: The Washer from TruRyde Bearing Kit # BK1-150 Does not Fit on the Spindle
- Q&A: How to Pick Out Replacement Bearings for a Trailer
- Q&A: Recommended Replacement Tires for Snowmobile Trailer Using 18.5x8.5-8 Tires
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range C
- Shop: Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range D
- Shop: Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range B
- Shop: Replacement Trailer Hub Bearing - L44649
- Q&A: Replacement Bearings and Hub for Malone MicroSport Trailer
- Q&A: Bearing Kit for EZ Loader Boat Trailer
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: How to Verify that the Bearking Kit # BK1-100 would fit Trailer Hub
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Search Results: 68149
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Video: Titan Trailer Brakes T2385200 Review
- Shop: Fifth Wheel Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Article: How to Choose the Right Trailer Hitch Class
on Trailer Bearings Races Seals Caps
