Will Equal-I-Zer Weight Distribution Frame Brackets Fit on 5 inch Tall Trailer Frame

Question

Question:

Do the spring bar brackets that come with the weight distribution set up compatibile with a 5 inch or do longer brackets need to be installed to compensate for the of the reciever

asked by: Mark B

0

Expert Reply:

The frame brackets that are included with the Equal-I-Zer weight distribution system part # EQ37121ET will work well on your trailer frame that is 5 inches tall as they are compatible with up to 6 inch tall trailer frames.

expert reply by: Jameson C

0

Answer 1

Toy haulers like your 2019 Coachmen Adrenaline 25qb do make it interesting when picking out a weight distribution system since the "toys" are carried behind the rear axle which would make the tongue weight lighter actually. But with a full…

view full answer...

Answer 2

You've done solid research so far on what to go with but one thing worth noting is that all weight distribution systems make noise. With as much tension is in the setups and the fact the components move with that much tension noise is created.…

view full answer...

Answer 3

Accuracy is the most important thing when it comes to tongue weight scales in my opinion and convenience is a plus. The etrailer Tongue Weight Scale #e99044 is both. I have gotten my hands on this product and used it. One of my favorite things about…

view full answer...

Answer 4

I have an option that will give you the exact tongue weight of your trailer loaded or unloaded, but there is not a formula to determine the tongue weight of your toy hauler travel trailer with something loaded. You will want to use a tongue weight…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 11

Based on the information I could find the Samsung MR1031UWC is a countertop style microwave that is 20-11/32" wide, 13-11/32" tall and 14-5/8" deep. Currently we only have over the range and built in style microwaves. If your microwave…

view full answer...

Answer 12

Hey Roger, yes you could remove the trim of the High Pointe Built In Microwave part #HP84ZR and it could sit on a counter top like you asked about. The dimensions listed for it are correct for without the trim kit: 19" W x 11.375" H x…

view full answer...