Choosing the Right RV and Camper Bike Racks Video

It sounds like you need to re-calibrate the zero point on your Lippert Ground Control 3.0 #LC304136 system. Below I've listed out the steps you'll need to follow and will allow you to use the auto leveling again. Zero Point Calibration The…

Yes, the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes, #HLY64FR, has an anti-rattle hitch pin and hitch tightener to reduce movement of rack in hitch receiver.

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to…

In terms of choosing a Lippert Solid Step, you'll use the width of the finished door at it's narrowest. Round that number up to the next full inch, which in your case would be 28 inches. In that case, you'll want the adjustable model…

Generally speaking, only bike racks that have a solid steel shank are rated for use on the back of a travel trailers, 5th wheels and flat towed vehicles because of the extra movement that is going to occur at the back of these vehicles. It isn't…

The TruRyde Spindle Nut #165686 has an outer measurement of 1.45 inches. You will use a 1-1/2 inch socket on this castle nut or we usually use a channel lock for these installations. I've attached a video of an installation of a hub to assist.…

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

Yes the cradles of the Yakima Ridgeback part #Y02458 can be rotated as well as adjusted in and out on the arms to allow for different spacings. So the big difference between this rack and the FullTilt part #Y02462 is that the Fulltilt does not use…

Carrying bikes while using a tow dolly can be a bit tricky since the rear of your towed vehicle will be angled down so instead I recommend using the Shank for Gen-Y Adjustable Ball Mount #325-GH-304 in the rise position and then using the lowest…

In order to flat-tow a vehicle and carry bikes at the same you'll need a dual hitch adapter like the Roadmaster Dual Hitch Receiver Adapter for Tow Bars part #RM-077-2 or part #RM-077-4. In most cases, your bikes won't come into contact with…

Yes, the Curt trailer hitch receiver will indeed fit your 2020 Chevy Sonic with the RS package! The only thing to note is that there are two different fits, depending on if your Sonic is a hatchback or sedan: - Hatchback: Curt Trailer Hitch Receiver…

You can carry 2 bikes with the GearSpace 34 Enclosed Cargo Carrier for 2" Hitch part #HGK826 or part #HGK819 with the Let's Go Aero 2 Bike Mount Kit for GearSpace 34 Enclosed Cargo Carrier part #HGK963-2 which will attach to the floor pan of…