Install Instructions for Locking Portion of Rhino Rack SRB Legs

Question

Question:

Can you send me instructions on the installation as to not get them stolen please any ideas?

asked by: Brandon

0

Expert Reply:

For the Rhino Rack foot kit part # RRSX032 that you referenced I attached a link to the install instructions.

I also attached a picture that I took from the install instructions that covers the locking portion of the rack.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The pins that attach the #RRSX032 to the rails of your 2017 Hyundai Santa Fe are a key component to the rack attaching to the vehicle roof securely. You will need to keep them intact.

view full answer...

Answer 2

It should not be difficult at all to install. That said we've had a customer come back and give advice on installing the foot kit part #RRSX032 that I'll pass on. 1. As shown in step #1 in the printed instructions, there is a cam that has to…

view full answer...

Answer 3

For your 2014 Hyundai Santa Fe Sport to carry your kayaks, I recommend Rhino Rack's Vortex Aero kit as a roof rack. This kit consists of: Rhino Rack Vortex Aero Crossbars, 54 Inches #RRVA137B-2 Rhino Rack 2500 Series Legs, part #RRRLKVA Rhino…

view full answer...

Answer 4

You mentioned your 2014 Hyundai Santa Fe Sport has rails, though I'm not sure if you were talking about just the flush-mounted side rails without a roof rack, or that you also had the factory roof rack. So in the interest of being thorough,…

view full answer...

Answer 5

Vehicles like your 2014 Hyundai Santa Fe with its large glass sunroof can pose a challenge to transporting large items such as a pair of kayaks. We do offer a range of different types of kayak carriers, ones that require a rack and ones that do not,…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Install Instructions for Locking Portion of Rhino Rack SRB Legs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching