Adapter that Fits 1-1/4 inch Hitch and Provides 2 inch Hitch Opening

Question

Question:

Hi is there any type of hitch that converts 1 and 1/4 inch receiver to 2 inch receiver? thanks,

asked by: Jim B

0

Expert Reply:

We have the adapter part # HTAD which fits into a 1-1/4 inch hitch and provides a 2 inch hitch opening. You should note that this adapter cuts the capacity of the hitch it is installed in by 50 percent.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The dimension you are looking for is 4-3/4 inches.

view full answer...

Answer 2

Yes, you would want to use an anti-rattle for the 1-1/4 inch portion of the adapter. For that the Hitch part #C11257 would work well. It uses a U-bolt to hold the adapter tight to the hitch tube.

view full answer...

Answer 3

We carry one 2 inch trailer hitch receiver to fit your 2015 Subaru Impreza, the EcoHitch, part #306-X7211. However, it only fits if your vehicle has the knock out panel on the rear bumper. If your Impreza doesn't have a knock out panel then…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Adapter that Fits 1-1/4 inch Hitch and Provides 2 inch Hitch Opening

Product Page this Question was Asked From

Continue Researching