How Much Does Curt Q24 5th Wheel Trailer Hitch with Ford OEM Legs Weigh

Question

Question:

How much does the curt q24 for Ford puck system weigh

asked by: Joseph F

0

Expert Reply:

The Curt Q24 5th wheel trailer hitch # C16545-16017 is comprised of a couple of parts. The head and center section have a shipping weight of 111 pounds. The legs to fit the puck system in your 2017 Ford F-350 have a shipping weight of 56 pounds. You can subtract a few pounds from the 167 pound total to account for the packaging. I have linked a video review of this hitch for you.

expert reply by: Michael H

0

Answer 1

Since no 2 trucks of the same year, make, and model will be identical it is possible to run into little issues like this. While I would not suggest using a sledge hammer, maybe a mallet instead, there are some adjustments that you can make to get the…

view full answer...

Answer 2

Spray in bedliners are not an issue for the fifth wheel hitches that fit the factory fifth wheel rail kits of the 2017 Ford F-350 like what you have. I attached a picture to this page that shows this Curt 5th wheel hitch #C16545-16017 installed in a…

view full answer...

Answer 3

The Curt Q24 part #C16545-16017 that you referenced would be a direct fit for the factory rail kit of a 2017 Ford F-350 with the factory rail kit. You would need to have the factory rail kit installed in order for it to fit.

view full answer...

Answer 4

Yes, the Adapter Rail for Curt 5th Wheel Hitch's part #C88KR which is a fit for a 2021 Chevrolet Silverado 3500 will work with a Reese 16K 5th Wheel Hitch. They are simply above bed rails so they will work with Curt, Reese, Husky etc. hitches.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

How Much Does Curt Q24 5th Wheel Trailer Hitch with Ford OEM Legs Weigh

Featured Help Information

Miscellaneous Media

Continue Researching