Comparing the Timbren Suspension Enhancement to other Helper Springs Options for 2007 Tundra

Question

Question:

I have a 2007 Toyota Tundra 5.7L V-8 SR5 4dr DCab short bed with the towing package and will be pulling a 5th wheel trailer, 9000# loaded. Id like to add a little extra support for towing and beside getting heavier 10 ply tires, Id like to know which product would serve my needs better. The Timbren TTORTUN4 or the Air Lift Aircell Custom Helper Springs Kit AL52210? Thanks for your advice.

asked by: Jack

1

Helpful Expert Reply:

For your 2007 Toyota Tundra, I highly recommend the Timbren Rear Suspension Enhancement System part # TTORTUN4. The Timbren springs will be much more durable than the Air Lift AirCell Custom Helper Springs Kit which was discontinued. The durability will result in more support and a longer life. The Timbren have also produced much greater feedback from our customers and are currently one of the most popular suspension enhancements we carry.

I have attached a review video of the Timbrens for you as well. These springs are very strong which can also mean stiff so you may want to consider the SuperSprings SumoSprings # SSR-610-54 which will give you support for your trailer but are more forgiving if you don't have the 5th wheel trailer connected.

expert reply by: Conner L

1

Answer 1

Those are very good questions and let's start with the capacities of both systems. The SumoSprings Solo Custom Helper Springs #SSR-612-40 has a 500 lb capacity and SumoSprings #SSR-612-47 has a 1,000 lb capacity, which means that is the…

view full answer...

Answer 2

Jounce-style rear springs definitely offer the easier install (and maintenance thereafter) compared to air bag kits like the Firestone #F2410 you referenced, however they aren't the best option if your main concern is rear sag from a…

view full answer...

Answer 3

You are definitely on the right track with the SumoSprings. For your 2021 Toyota Tacoma, I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-612-47. The reason why is because this model of SumoSprings will provide your…

view full answer...

Answer 4

I have a great SumoSprings solution for you. Unfortunately, the blue SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-610-40 will not fit your 2021 Toyota Tacoma Trd 4x4. With that being said, for higher capacity springs on your truck to give…

view full answer...

Answer 5

Some 2021 Tacoma were equipped with 3 leaves in the springs, some with 4, so you'd just need to take a quick peek at what you have to determine which Timbren kit you'll need, as I have no way to look up how your truck is equipped. For a 4WD…

view full answer...

Answer 6

For your 2022 Tacoma you are going to want the SumoSprings Solo Custom Helper Springs item #SSR-612-47. These attach directly above the leaf springs so the block between your axle and leaf spring won't affect the springs function. I have linked…

view full answer...

Answer 7

You are probably at the edge of your hitch tongue weight capacity if not over which does make sense that it would cause some rear end sag. I recommend using the SuperSprings Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear…

view full answer...

Answer 8

With the tongue weight of the trailer and the weight of the topper, the Sumo Springs #SSR-612-47 with a 1000-lbs capacity are the right choice since Sumo Springs are progressively load bearing; this means that they get stiffer as more weight is…

view full answer...

Answer 9

Both the Timbren #TTORTUN4 and SumoSprings #SSR-610-54 that you mentioned for your 2020 Toyota Tundra are jounce-style springs but the main difference between the two options is their actual construction, and subsequently the ride quality they will…

view full answer...

Answer 10

The main difference when comparing Timbren and SumoSprings for suspension enhancement is going to be the weight capacities. Timbren uses hollow rubber springs that is able to support more weight but they can cause a firmer ride. The SumoSprings are…

view full answer...

Answer 11

For your 2017 Toyota Tacoma, the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-612-47 are my recommendation. This is a popular option and will give you support while fitting your 4 leaf springs. In my opinion these are better for both…

view full answer...

Answer 12

I just spoke with my rep at Timbren. The height of the Timbren Suspension Enhancement System - Rear Axle Item #T62FR for your 2010 Toyota Tundra is 3 9/16 inches for the rubber spring portion and 1 5/16 inches for the bracket with a combined overall…

view full answer...